X

PRODUCTS

Electric hoists represent their own machinery, strength, and toughness, while the stage is elegant, flowing, and soft, with conflicts and collisions between the two.

Heavy Weight Cargo Chain Hoist Stage Crane

Time:2024-01-18

Brief Explanation :

How to use stage electric hoists or stage chain hoists to lift stage scaffolding?

Category : V7 Stage Electric Series

Get a Quote

Product Details

How to use stage electric hoists or stage chain hoists to lift stage scaffolding?

1: First, install and fix all peripheral racks firmly.

When installing the electric hoist, first hang it vertically, fix the upper and lower hooks on the reserved positions of the frame, and hang it downwards with the lifting chain below.

3: After hanging them one by one, it is necessary to check whether the electric hoist is on the same plane and kept parallel.

4: Connect the power and ground wires, and then perform a trial lifting operation to check if all electric hoists are working properly.

How to install the stage electric hoist on the studio track?

The lifting of electric hoists can be carried out using a crane according to the actual situation on the construction site, or using a pulley block with a winch for lifting; When hoisting, protective measures must be taken to tie the rope to prevent damage to the equipment. According to the weight of the equipment itself, choose the rope lifting tool for hoisting.

Gap adjustment

The clearance between the inner side of the walking wheel rim of the electric hoist and the flange of the I-beam rail is ensured to be between 3-5mm, which is achieved through gasket adjustment. This is crucial and must be achieved.

Adjustment of motor spindle displacement

The best braking effect is achieved when the axial displacement of the main shaft of a conical rotor motor is generally 1.5mm. If the electric hoist slides too much under rated load, it needs to be adjusted. The adjustment method is as follows: remove the tail cover. Unscrew the four screws that fix the adjustment nut, use a wrench to turn the adjustment nut clockwise to the limit position, then turn it counterclockwise one more turn, and then install the fixing screw.

RELATED PRODUCTS .

RELATED NEWS .

Copyright © 2023 Tianjin Kemei Machinery Manufacturing Co., Ltd